Understanding LED Behaviour
HaLowLink APX — LED & Button Behaviour Specification
Common LED States
|
Phase |
rgb:led1 (top) |
rgb:led2 (middle) |
rgb:led0 (bottom) |
|---|---|---|---|
|
DTS / Early boot |
Solid yellow |
Off |
Off |
|
Booting |
Flashing green |
- |
- |
|
Factory reset pending (≥10s button) |
Fast flashing yellow |
Fast flashing yellow |
Fast flashing yellow |
Access Point
|
Phase |
rgb:led1 (status) |
rgb:led2 (haLow) |
rgb:led0 (link) |
|---|---|---|---|
|
OOB reset / Normal operation |
Solid green |
Solid purple |
- |
|
Fully online (DHCP + certs) |
- |
- |
Solid green |
|
DPP PB (120s timeout) |
- |
Flashing purple |
- |
|
DPP PB Failure (stops after 120s) |
- |
Fast flashing purple |
- |
What the AP runtime LEDs mean to the user
|
AP Status LED (rgb:led1) |
Meaning |
|---|---|
|
Flashing green |
Booting. |
|
Solid green |
Device has booted. |
|
AP HaLow LED (rgb:led2) |
Meaning |
|---|---|
|
Off |
HaLow is not up |
|
Flashing purple |
DPP Push Button pairing is active |
|
Fast flashing purple |
DPP Push Button pairing failed or timed out |
|
Solid purple |
HaLow AP is up in normal operation |
|
AP Link LED (rgb:led0) |
Meaning |
Internal state |
|---|---|---|
|
Off |
No Ethernet carrier detected on lan1 or lan2 |
link_down |
|
Flashing yellow |
Ethernet carrier is present and br-lan has an IPv4 address, but the cloud session is not online yet |
ip_assigned |
|
Flashing green |
Cloud bring-up or reconnect is in progress |
cloud_searching |
|
Solid green |
Cloud session is fully online |
cloud_online |